Simer Composite Jet Pump
- Superior performance to depths of water 25′ or less
- Fiberglass reinforced thermoplastic pump housing for
the highest corrosion resistance - Energy efficient motor
- 3/4 and 1 HP ready to install heavy-duty dual
voltage motor pre-set at 230 volts - 1/2 HP ready to install heavy-duty dual-voltage motor
preset at 115 volts - Self priming after pump housing is initially filled protects
against overheating - 1-1/4″ NPT suction and 1″ NPT discharge pipe size
Description
BODY CONSTRUCTION: Thermoplastic
MAXIMUM CAPACITY: 7.4 GPM
FLOW AT 10′ LIFT AND 40 PSI: 6.4 GPM
MAX LIFT: 25′
MAX SHUT-OFF PRESSURE: 77 PSI
MAXIMUM INLET PRESSURE: 22 PSI
PRESSURE SWITCH SETTING: 30 – 50 PSI
SUCTION SIZE: 1-1/4″ NPT (female)
DISCHARGE SIZE: 1″ NPT (female)
AMP DRAW (full load): 9.9 amps on 115v / 4.95 amps on 230v
VOLTAGE: 115v/230V ac, 60 Hz (factory pre-set to 115v)
RECOMMENDED BREAKER: 15 Amp
MAXIMUM WATER TEMPERATURE: 140 °F / (60 °C)
Additional information
Brands | |
---|---|
Simer Composite Jet Pump | 3105P Simer 1/2 hp Composite Jet Pump, 3107P-10 Simer 3/4 hp Composite Jet Pump |